It's unavoidable to make a few mistakes when learning a new skill. It's all a part of the process. Even the most experienced seamstress might experience the dreaded skipped stitch or broken needle, as well as the most irritating of all sewing machine problems: thread bunching. We are here to help.
PROBLEM: STITCHES ARE COMING OUT UNEVENLY OR NOT AT ALL.
SOLUTION:
The most likely culprit is a needle that has been fractured, bent, or somehow damaged. According to experts of Sewing Centre in Toronto, you should replace your needles every 16 hours of stitching time.
In Toronto, if you have the habit of dragging the fabric from behind to get it through, it might result in sloppy stitching and potentially destroy your machine. This type of fabric force-feeding operates against the feed dogs. Work with the machine rather than against it.
PROBLEM: THE THREAD IS CLINGING TO THE FABRIC.
SOLUTION:
On the top, you may have a perfectly straight stitch, but on the bottom, you may have a "bird's nest" forming. So, what's the deal with the inconsistency? People frequently assume that the bobbin is to blame; nevertheless, this is far from the case. Because there is no tension on the higher thread, the thread is snarled — usually under the fabric. Doesn't it seem counterintuitive?
Nonetheless, here's what you should do according to Sewing Machine Repairs in Toronto: First, rethread the machine and raise the presser foot lifter. The tension mechanism is now open and ready to receive the thread. Second, according to your machine's manual, elevate the take-up lever and needle to the highest setting.
0 comments:
Post a Comment